Rohde & Schwarz RT-ZI10C-2 500MHz Isolated Passive Probe,
Set of 2
Key Facts
- Set of 2
- Bandwidth: 500 MHz
- Dynamic range:
- All-rounders for general purpose applications
- Extensive accessories for optimal contacting
Rohde & Schwarz passive probes are the all-rounders in the world of probes. They are low-cost, general purpose solutions for a broad range of applications.
Universal application
Rohde & Schwarz passive probes are the all-rounders in the world of probes. They are low-cost, general purpose probing solutions for a broad range of applications. The BNC connector allows them to be used on almost any oscilloscope. Passive probes with readout pin enable Rohde & Schwarz oscilloscopes to automatically detect the attenuation factor. A spring-loaded tip ensures good contact with the DUT.
Individual adjustment for precise measurements
In order to achieve optimum measurement accuracy, passive probes with a probe bandwidth larger than 350 MHz must be adjusted to the input impedance of the oscilloscope. Rohde & Schwarz offers the R&S RTM-ZP10 and the R&S RT-ZP10 500 MHz passive probes, which are preadjusted for the R&S RTM and the R&S RTO oscilloscopes, respectively.
Extensive accessories
For optimal contacting, Rohde & Schwarz offers the R&S RT-ZA1 accessory set for passive probes. It includes spare spring-loaded tips, rigid tips, ground contact springs, ground leads and color-coded rings.
Rated voltage
Shield / earth - Solid lines
Probe tip / shield - Broken lines
Product Name |
Bandwidth |
Maximum Voltage |
Attenuation Factor |
Input Impedence |
Comment |
RT-ZP1X |
38 MHz |
55 V (RMS) (CAT II) |
1:1 |
1 MΩ || 39 pF |
|
RT-ZP03 |
300 MHz |
400 V (RMS)
55 V (RMS) |
10:1 1:1 |
10 MΩ || 12 pF
1 MΩ || 82 pF |
|
RT-ZP05S |
500 MHz |
300 V (RMS) |
10:1 |
10 MΩ || 10 pF |
Dual pack available:
R&S RT-ZP05 |
RTM-ZP10 |
500 MHz |
400 V (RMS)
300 V (RMS) (CAT II) |
10:1 |
10 MΩ || 9.5 pF |
2.5 mm tip diameter,
pre-adjusted for R&S RTM2000 |
RT-ZP10 |
500 MHz |
400 V (RMS)
300 V (RMS) (CAT II) |
10:1 |
10 MΩ || 9.5 pF |
2.5 mm tip diameter, pre-adjusted
for R&S RTO2000/R&S RTE1000 |
RT-ZI10 |
500 MHz |
600 V (RMS) (CAT IV)
1000 V (RMS) (CAT III) |
10:1 |
10 MΩ || 12 pF |
Dual and quad packs available for
R&S RTH handheld oscilloscope:
R&S RT-ZI10C-2, R&S RT-ZI10C-4 |
RT-ZI10C |
500 MHz |
300 V (RMS) (CAT III) |
10:1 |
10 MΩ || 11 pF |
For R&S RTH handheld oscilloscope |
RT-ZI11 |
500 MHz |
600 V (RMS) (CAT IV)
1000 V (RMS) CAT III
3540 V (pk) (CAT 0) |
100:1 |
100 MΩ || 4.6 pF |
For R&S RTH handheld oscilloscope |