Prostat PWS-610M - Fabric Band Wrist Strap

Fabric Band Wrist Strap

Comfortable & Operator Friendly
Includes a 12 foot cord with 1 Megohm Resistor
Adjustable buckle with a 4mm snap
Built-in 10mm male snap with cap
Uses 1/3 the working or storage space
Metal Alligator Clip included
One size fits all
Meets the requirements of ANSI/ESD S20.20 and ANSI/ESD S1.1

View Product Details

Your Price: $31.00

In Stock:

View Payment Options

Request Quote

Items in This Series


Product	Prostat PWS-610M Fabric Band Wrist Strap
Price
In Stock
Compare	Add to compare

Description

Prostat PWS-610M - Fabric Band Wrist Strap

In conjunction with the best product designers in the ESD industry, Prostat has created new refinements in wrist strap technology. Prostat wrist straps are specially designed for durability, lightweight, portability and comfort.

These unique personnel and instrument grounding products are intended for use in demanding, high-performance applications where reliability is the priority.

Compared to traditional wrist straps with fabric cuffs, the PWS-610M weighs 60 percent less (under 1 ounce) and uses 1/3 the working or storage space of a standard assembly. The PWS-610M features a comfortable, adjustable band, and a 12 ft. ground cord with a 4mm snap. The fabric band also has a 10mm male snap with a protective cap. The ground cord, which has a 1 megohm resistor built into it, exceeds 20,000 cycles of bending life test without any physical damage to the strain relief.

In The Box

Manuals/Guides

Manufacturer Specs

Specifications
CUFF ASSEMBLY
BUCKLE	1.0W x 1.0L x 0.25H inches. Gray, Adjustable with positive lock, stainless steel back plate. Standard male 5/32" snap (0.154 inch, 4mm); provides 360o performance. Patented, Easily adjusted buckle incorporating a positive fabric lock to eliminate slip and enhance skin contact. Non-sensitizing stainless steel back plate.
FABRIC	0.85 inches wide. Grey, knit incorporating silver plated filament and elastic nylon. Insulative outer cuff surface, conductive inner cuff surface.
SIZE/LENGTH	Nominal 6.5" After stretching to 2x length and relaxing.
ADJUSTABLE	Easily adjustable to fit all personnel.
CONTROL	Date coded and Prostat manufacturer's logo embossed on all cuff assemblies
“M" SERIES CUFFS	Incorporate a 10mm male snap and insulated snap cover installed in the fabric approximately 1.5 inches from the cuff buckle. The 10mm snap is used to mount and ground the Prostat PFM-711A Field Meter and CPM-720A Charge Plate Monitor.
CORD ASSEMBLY
CORD	Heavy Duty, Lightweight construction of Single bundle, laced tensile conductors reinforced with synthetic fibers. Cord Diameter: 0.06" Coil Diameter: 0.26" Alligator clip supplied.
RESISTOR	One megohm (±10%) resistor molded into snap connection
GROUND CONNECTION	Standard banana plug
WARRANTY	Warranted for One Year against mechanical and electrical defects.
CORD EXTENSION	Full extension greater than 13 feet; Working Length greater than 10 feet.
TESTED	Provides over 100,000 bending cycles per EOS/ESD-S1.0-1987 procedures.
WARNING	A one-megohm resistor has been molded into the plastic cap on the ground cord fastener. DO NOT REMOVE. If it becomes damaged, replace ground cord immediately. Do not use in areas where the individual may come in contact with electrical circuits exceeding 250 volts.
CAUTION	The Prostat wrist strap is for static control. It will not reduce or increase your risk of receiving electrical shock when using or working on electrical equipment. Follow the same procedures you would use without wrist straps, including: * Make certain that equipment having a grounding type plug is properly grounded. * Make certain that you are not in contact with grounded objects other than through the strap.